Screenshot 2018-10-07 at 7.00.07 PM.jpg

Hi, I'm building my first saber and wanted to use a BBBW Quad-Cree with a NBv4 if possible. I've seen some people say this can be rather complicated, but the diagram in the NBv4 manual made it seem simple, let me know if I'm thinking correctly here. Using the power xtender you should have 3 high power LED pads, L1 L2 L3, each pad is rated at 4 amps. If I parallel 2 of the blue dies to L1, and we'll assume the correct resistors are in use for simplicity, then attach the 3rd blue die to L2, I can then attach the white FOC die to L3 via the power xtender. Wouldn't it be that simple or am I missing something? Also, If I wire it this way, does the NBv4 know to use the white die for flash on clash, does it default to whatever die uses the xtender for this function? Thanks so much. - Jonathan