Ledstrip color definition - Color Order
For a ledstrip, the color of the blade and FoC are defined by the same keywords and technique as high-power LEDs. Color profiles are set with a list of 3 numbers defining the color mix of R, G and B using the keyword color and fcolor (FoC). For standard blade color definition (config.txt) the same color mix is defined by the keywords drive and fdrive.
The color order is however specfic in the case of a ledstrip as you cannot remap the way the strip controller codes colors. We've kept the classic RGB order which works for all the pixels we've tested except the PL family which will be GRB.
For instance, a red blade using regular Neopixels would be defined by :
drive=1023,0,0 <per font color definition>
or
color0=1023,0,0 <color profile 0>
Bookmarks