Results 1 to 8 of 8

Thread: Blade Cutting Tip - Quick, clean and easy!

  1. #1

    Default Blade Cutting Tip - Quick, clean and easy!


    Here's a quick video demonstrating how I cut my blade stock. Using a bit of 1/2" pvc and a pipe cutter, you can have a clean, dust free blade ready to go with a nice rounded edge perfect for inserting into your blade holder!

  2. #2

    Default

    Wwoooww, Nice one JB! Thanks for the awesome tutorial.

  3. #3

    Default

    I use a pipe cutter too, but didn't use the PVC inside the blade stock. That's a good idea. It can be done without it, but you cant apply as much pressure or your deform the blade stock, so you have to do a lot of turns, tighten a bit, then turns, then tighten. Same results, just takes longer. That's a great tip.

    Tom

    "Mistakes are our greatest teacher."

  4. #4

    Default

    Yeah I've done it without and it's really frustrating and time consuming.

  5. #5

    Default

    That's a pretty good tip. I've always done mine with a pipe cutter, but never thought about putting pvc inside as support.
    We all have to start somewhere. The journey is all the more impressive by our humble beginnings.

    http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
    http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!

  6. #6

  7. #7

    Join Date
    Jul 2018
    Location
    United states
    Posts
    8

    Default

    Man that’s a great tip! I cut one with a miter box and saw and all kinds of particles and dust...��

  8. #8

    Default

    Nice! Why didn’t I think of that?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •