Results 1 to 7 of 7

Thread: Flame Blade Parameters for neopixel on Prizm?

  1. #1

    Default Flame Blade Parameters for neopixel on Prizm?

    Hey guys, Dbase again, I also posted about the dark spots right below this post. So I got my blade up and running and looking great. I just picked up a cool kylo soundfont and was wondering if anyone had created a flame blade before using the Prizms blade parameters in the config.txt. I've seen the crystal shard be able to do something like it but the parameters are completely different. So if anyone has messed with this before and is willing to share how they created a flame/ damaged blade effect it would be much appreciated! Thanks!

  2. #2

    Default

    I have not wired a prizm before but I think I can help you.
    it doesn't have that "flame effect" that the crystal shard has, but the closest would be the flicker parameters labeled as: flkrs, for flicker speed and: flkd for the flicker depth. Read through the prizm manual http://www.plecterlabs.com/Media/Doc...-rev1.0-GB.pdf

  3. #3

    Default

    Only seen on using a Teensy. Tom's got a good set up for one.

  4. #4

  5. #5

    Default

    Plecter's CS 4.5 has it, DIYino w/fx OS, and TeensySaber. I'm sure Plecter nd NEC will both eventually enable blade effects on their boards that can control neopixel string blades, but only the CS 4.5 right now....and you can't get that board unless you're a manufacturer or "connected".

    Your best bet on the Prism is an intense flicker, but it won't be the same.

    Tom

    "Let the past die."

  6. #6

    Default

    Quote Originally Posted by Tom Tilmon View Post
    Plecter's CS 4.5 has it, DIYino w/fx OS, and TeensySaber. I'm sure Plecter nd NEC will both eventually enable blade effects on their boards that can control neopixel string blades, but only the CS 4.5 right now....and you can't get that board unless you're a manufacturer or "connected".

    Your best bet on the Prism is an intense flicker, but it won't be the same.

    Tom
    Thanks! I'll mess around with those settings a bit. It's too bad that it is only for CS 4.5 right now, but hopefully released in the future!

  7. #7

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •