I'm thinking of putting an aluminum pipe on the outside of the handle.
Can I have the inside diameter of 1.5 inches?
Please give me some advice.
Please helpdd295b43d4c1346b98d3cc5ef784be68.jpg
Look at it this way.
I'm thinking of putting an aluminum pipe on the outside of the handle.
Can I have the inside diameter of 1.5 inches?
Please give me some advice.
Please helpdd295b43d4c1346b98d3cc5ef784be68.jpg
Look at it this way.
I also partially covered of my saber with aluminum tube, for layering . The sleeve material that tcss sells is perfect for this. http://www.thecustomsabershop.com/MH...l-12-P468.aspx
Making a shroud is actually my favorite part of building a saber.
The tcss sleeve material is thicker and looks nicer in many ways (and perfectly fits tcss modular parts), but 1.5 inch plumbing tube is easier to work (the correct gauge tube should easily slip over saber parts).
It all boils down to personal preference in shroud design.
Player: I feel your anger, master.
Darth Baras: A blind, deaf, comatose, lobotomy patient could feel MY ANGER!!
thank you^^
Right.
Thank you very much.
Bookmarks