Results 1 to 3 of 3

Thread: LS6 Control Box

  1. #1

    Default LS6 Control Box

    Does any one have a wiring diagram on how to have the control box control the saber. So be able to use the 2 tactile switches for your activation and aux switch and still have the led's that come with the LS6 control box kit flash and work?

  2. #2

    Default

    The circuit board in this box is designed to stand alone, really. If it helps, the positive is the bottom edge of the card and it's designed to make contact with the box (and therefore the hilt) and the negative is the top metal part. I actually made my own PCB for this so the LEDs are WS2812 5050 and the LED connections and switches are just broken out to through hole pads.

  3. #3

    Default

    Actually, it looks like the store has been updated with recommendations for ways to wire it up.
    http://www.thecustomsabershop.com/Bo...kit-P1377.aspx

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •