-
My resistor math
Does the follow look ok? (I've been told that amber should require higher value resistor than the white but my math says otherwise)
Amber Tri Cree = 3.28 @ 1000ma
3.7-3.28/1.000=.42
-------------------------------
.5 ohm resistor is ok?
White Tri Cree = 3.15 @ 1000ma
3.7-3.15/1.000=.55
-------------------------------
1 Ohm resistor is ok?
-
Jedi Council Member
Yes to both. You will generally have to round up a little, since not every single resistor size is commonly made.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Thank you..it seems the FV of amber dies is constantly changing. My research was telling me I was incorrect, but alot of it seems to be outdated.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks