Results 1 to 5 of 5

Thread: NBV4 Neopixel FoC issue

  1. #1

    Default NBV4 Neopixel FoC issue

    Hi Guys,
    Needed some help here. I manage to get the neopixel to lit up without issue. But the problem i am facing now is the FoC and swing sensitivity are not coming up even how hard i swing it or hit it.
    Construction
    NBv4
    AWG #26 military spec wires.
    470ohm 1/4 watt resistor for data wires
    TCSS neopixel PCB
    KR 18650 High amp battery

    Please advice.
    Noob here.

  2. #2

    Default

    Where in the hilt is the Nano, did you change the fonts or mess with the config file at all?

  3. #3

    Default

    Issue solved. Thank you

  4. #4

    Default

    No i didn't make any changes earlier. Well the board is near the emitter and i decided to increase the FoC and swing figures and it works.

  5. #5

    Default

    Yea, the Nano usually goes more towards the middle or pommel.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •