-
My first build.
I bought my first saber from a $75 Mystery Box 10 months ago from US at a Con. It went downhill from there LOL. Since I have bought 6 more (3 for the kiddos), won one, and traded one. But after seeing others build their own I knew I had to do the same.
Got most of my parts from TCSS and pommel from US. Along with all the pieces I went with a Tri Cree Red, Red, White LED and a NB 4 soundboard. It looked like it would be one of the easier ones to build with and wasn't to expensive.
IMG_20180206_000400013-L.jpg
IMG_20180227_174458114-S.jpg
So detail from the pommel up. I ordered the pommel plain but it came to me coated in black, instead of going through the trouble of sending it back I just decided to weather it a little.
IMG_20180303_151422916-S.jpg
The next piece is a gear and I ordered it with Black Wrinkle coating so I didn't do anything with that piece.
The next section of the hilt I decided to do an etching using Copper Sulfate. So I came up with a design and using P&P Blue I transferred it to that part of the hilt. Then did the etching, I wanted it kind of deep and this was my first time doing this, I could have went a little longer but I like the way it came out. This section also holds my activation box which includes my AV switch and recharge port.
IMG_20180215_023237621-S.jpg
IMG_20180310_121359651-S.jpg
IMG_20180310_180925234-S.jpg
IMG_20180310_183728955-S.jpg
IMG_20180310_192707395-S.jpg
IMG_20180310_192712683-S.jpg
IMG_20180310_193851387-S.jpg
Last edited by tx_tuff; 03-30-2018 at 12:45 AM.
-
Next was my grenade section. I took the neck off and painted it antique brass and later weathered it a little with some paint. The grenade I used Aluminum Black on.
IMG_20180303_155840418-S.jpg
IMG_20180310_201851604-S.jpg
IMG_20180303_144036932-S.jpg
IMG_20180303_155852494-S.jpg
IMG_20180303_155950333-S.jpg
The emitter I did a couple things to. I used Aluminum Black inside of the emitter and on the outside I laid out a pattern using pin strip and also Copper Sulfate etched it.
IMG_20180310_192718849-S.jpg
IMG_20180310_192723180-S.jpg
IMG_20180310_193906541_BURST001-S.jpg
Last was all the electronics, something I had never done before (other then change an LED unit). I will add here I had some problems because I had some cheap solder and bad flux so some of the soldering didn't take. But after a little research (which I should have done first) I got some good solder and flux and had no problem doing my fixes. As stated above it is a NB 4, two red LEDs as my main color and white LED for FOC. I didn't do anything nice with the inside, it is not made to be taken apart and looked at LOL. Maybe one day but I wasn't ready for that. I love the end result and am proud of it, its name is B. M. F.
IMG_20180311_140442597-S.jpg
IMG_20180310_202256318-S.jpg
-
-
Very nice looking saber tx_tuff. Good work.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks