Hi everyone.
I just finished my FIRST saber!
But now it occasionally will turn on but not back off. I use a kill key to power it down and leave it off for 5 minutes after which it works fine again.
I have a Pico Crumble v2:Light card, 3.7v 18650 Li Ion battery, Tri Cree R/G/B LED, 16mm Illuminated AV Momentary switch (Red Cog), Recharge Port and 2w 28mm Bass speaker as my main components.
I have the Recharge Port in the pommel using the Brass insert it fits on. I used a .75 in Extension to provide the room for it to fit without cramming it. Everything else is standard.
I took it back apart but couldn't find any loose wires or bad soldering. Doesn't mean that there couldn't be. Any ideas or suggestions would be appreciated.
Bookmarks