Results 1 to 8 of 8

Thread: Tips for illuminated blade tips?

  1. #1

    Default Tips for illuminated blade tips?

    Anyone have suggestions for illuminating a blade tip in a lightsaber with a hilt-mounted LED? Would simply drilling a hole in the center of the mirrored end do the trick, our would that mess up the reflection too much? Thanks for any and all suggestions.

  2. #2

    Default

    I've tried a smaller mirrored disc to allow light to pass around it and a hole in the middle of the mirrored disc to allow light to pass through it. Neither are perfect but the former is slightly better than the latter and they still reflect some light. These were both bullet tips.
    I remember once seeing someone hollow the tip out with a drill. It lit up well but it lost the reflection.
    That's all I got

  3. #3

    Default

    House window mirror tint.

  4. #4

  5. #5

  6. #6

    Default

    Hey @Renaissance Jedi ! Try Kouri's hollow blade tip method with reflective film...

    http://forums.thecustomsabershop.com...tchbuild/page2

    Good Luck on your tips!

  7. #7

    Default

    Yeah. ^^thats the one I'm talking about^^

  8. #8

    Default

    Thank you everyone! This was super helpful.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •