Hello all,

I need help ASAP!

Just recently got all the parts in for a build I知 doing with a prizm v5 board and wanted to wire up the rgb led for color mixing, as well as a rotating chamber with rgb led to match main blade. I also have a green and blue anti vandal switch (for activation and aux switches)...

I had everything wired up, pulled the kill key and none of the leds worked and the rotation of the chamber started immediately when I pulled the kill key.

Sounds and effects all worked just no led..
Used Shameems video for basic prizm install for reference:

I had the negatives to each main led wired to the L1,2,3 on the board
Each rgb negative for the crystal led was conjoined with each led to match main blade
Motor for chamber wired directly to main positive and negative to board
Main switch led wired to main positive and negative to board
Aux switch wired to an aux led pad to add a blink

Chamber rotated as soon as plug was out, none of the leds turned on.
I知 attempting to have rotation and chamber led begin with blade ignition and have chamber led match blade

What do I need to change in my wiring and have what go where to get this to work?
PLEASE HELP! Thank you