Page 4 of 4 FirstFirst ... 2 3 4
Results 31 to 32 of 32

Thread: First-Timer looking for a design proofread

  1. #31

    Default

    Ah, my mistake. I thought it was the LED of the AV switch, they are marked. Just swap your wires round on the LED, if it still doesn't work, it may have burnt out.

  2. #32

    Default

    Quote Originally Posted by Greenie View Post
    Ah, my mistake. I thought it was the LED of the AV switch, they are marked. Just swap your wires round on the LED, if it still doesn't work, it may have burnt out.
    Tim got back to me earlier and confirmed something I learned this past weekend, which is that the longer pin is the positive one.

    Unfortunately (and foolishly) I removed the wires soldered to the original accent LED without making any note of what was where, and don't know how it was wired, and therefore how to rewire it.

    I have a new one coming my way via a reorder though. Before trimming it down, I was thinking of seeing if I might be able to use the new one to identity which pin would be the positive on the original. Would it be a safe assumption that the placement of the pins with relation to the LX 4 marks would be the same?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •