Originally Posted by
jmebspence
Hi guys! I'm in the process of making my first lightsaber, which will have a PVC hilt. I'm using a two pipes; a 1 and 1/4 inch and a 1 inch pipe. I have a 1 inch thick walled blade that fits perfectly into the hole of the inner PVC pipe. I thought that I might be able to drill multiple screws that hold the blade in but I'm nervous that the hilt may break without a blade holder while sparring. The PVC is very strong but I want to make sure it doesn't break. Just to be clear there isn't any room in between the blade and the inner 1 inch pipe. Let me know what you think can be done! Thanks a lot!
Bookmarks