Results 1 to 5 of 5

Thread: Colour mixing

  1. #1

    Default Colour mixing

    Hi

    First post here.

    I need to understand how to wire 2 colours at the same time (G+B) on a RGB led. I have looked everywhere to find this out so sorry if its an obvious answer.

    First Lightsabre build/conversion so very naïve.

    Thanks

    George

  2. #2

    Default

    Hey George, welcome to the party. . If you're mixing two colours for a main blade, wire them in parallel - both wires connected to the same pad on the sound board or the switch if it is a stunt saber.

    Greenie

  3. #3

    Default

    Thanks. So 2 +'ve and 2 -ve wires from the led?
    Last edited by Geo; 01-19-2018 at 03:37 AM.

  4. #4

    Default

    That's correct. One pos and one neg from each colour die of the LED star, correctly resistored of course.

  5. #5

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •