Results 1 to 2 of 2

Thread: Pico crumble recharge port

  1. #1

    Post Pico crumble recharge port

    i just finished my first stunt saber and want to build a fx Version with pico crumble now.

    Im not sure if the recharge port is wired correctly. Why does it Need two negatives (one soundboard and one battery)? Something to do with the kill plug? Below is my wiring Diagramm (edited from Plecter manual). I would be pleased if you could take a look at the picture and tell me if the recharge port is wired correctly.

    pico wiring.jpg

    Thanks in advance and have a nice day.

    Okay i think i made a mistake, the direct Connection between the battery and soundboard must be invalid. Right?
    Last edited by robwin; 01-15-2018 at 05:52 AM.

  2. #2


    Your edit is correct. You need to remove the direct connection from the battery to the soundboard.

    The rest of your diagram appears correct.
    We all have to start somewhere. The journey is all the more impressive by our humble beginnings. for the lazy man's resistor calculator! for getting resistor values the right way!

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts