Results 1 to 4 of 4

Thread: Prizm 5.1 Clash false activations

  1. #1

    Default Prizm 5.1 Clash false activations

    So testing out my current build, Graflex 2.1 using Shtok's 3d printed chassis and a 31mm Speaker. Everything works great until I assemble the speaker housing to the chassis with the prizm mounted. Then I get a endless clash fest that only seems to stop if I remove the speaker housing and let it hang. Tried raising the clash settings in RICE but didn't actively notice a change. Battery was on charge all night as well, so I don't think it's a low battery issue.

    Any tips?

  2. #2
    Owner of the Custom Saber shop Strydur's Avatar
    Join Date
    Oct 2005
    Location
    USA
    Posts
    3,520

    Default

    Turn down the volume. I have noticed this on our 3D chassis as well.. once installed in the saber where the chassis is supported it is generally better.
    Tim
    The Custom Saber Shop

  3. #3

    Default

    Thanks! I'll give that a try. Once I figure out a good means of cutting the grip to be flush I can finish mounting the chassis we'll know if that helps.

  4. #4

    Default

    Yup that was the issue. Once chassis was in the hilt closed up I can have volume on 4 without false clashes.

    Thanks for the tip Tim!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •