Wiring Help - power on without Kill Key NB4-graflex build

[wannabe_paduwan]

Newb alert: First time build - power on with/without kill key
I have graflex with NB4, 5mm crystal led and 3mm led (power on), main B/B/W leds, goth3d knight chassis
I know I wired incorrectly somewhere and I think it's at the recharge port. Alternatively somewhere on the NB4 solder joints? The main LED and negative power solder joints are very, very close to each other. I thought for sure I soldered correctly and I've traced as much as possible but obviously I have a power short somewhere.
The symptoms are with/without kill key:
- 3mm LED power is ON with/without kill key
- activation switch turns out main leds and sounds with/without kill key
Just trying to troubleshoot before I wreck havoc on the build and myself. I'm a little concern I will fry the NB without knowing where the problem is. Any help on where to begin would help. Be gentle...I'm almost retired.

[Forgetful Jedi Knight]

You would need to post clear pictures of your wiring so we can see what's going on.

[wannabe_paduwan]

Problem solved. I had the tiny, tiny amt. of solder that rolled behind one of the negative terminals of the recharge port effectively bypassing the kill key. Removed it and all is functioning.