Page 2 of 3 FirstFirst 1 2 3 LastLast
Results 11 to 20 of 24

Thread: Disney parks kylo ren lightsaber

  1. #11

    Default

    Quote Originally Posted by jaylakejr View Post
    I just finished machining the blade holder. Rather than over complicate things, I bought the custom saber shop 1.5" sink tube LED\Blade holder, then I machined it down to fit the hilt. I took a little extra off in the middle for wiring and left a lip on the top for stability. Attached are pics.

    https://imgur.com/a/Lwrt9
    Have you fit it?? What about the sides?

  2. #12

    Default

    Quote Originally Posted by Hdjoe View Post
    Have you fit it?? What about the sides?
    Fits like a glove

    The sides from the inside have a 1 inch opening the custom saber shop 1 inch led/heatsink plop right in from the inside of the saber. One side was a little too tight so I used a dremel to sand it open a little more. I then drilled and tapped 10-32 holes and used a set screw to keep it in place. I left it in my office, I’ll try and take pics and post them soon.

  3. #13

    Default

    Im almost done wiring mine. I went with the Black series conersion kit and modified it to make it work.

    Do you guys know if the Spark 2 can manage the original switch ON/OFF button already present on the hilt?

  4. #14

    Default

    Damn I need to start ripping into mine... I have the chassis I just need to get the blade holders and led modules...
    Post some pics guys please!

  5. #15

    Default

    Do you mean the 1.25” sink tube blade holder? There’s no 1.5”

  6. #16

    Default

    Hdjoe, Wich Chassis are you using? Custom made?

  7. #17

    Default

    Quote Originally Posted by Hdjoe View Post
    Do you mean the 1.25” sink tube blade holder? There’s no 1.5”
    Actually, there is: http://www.thecustomsabershop.com/15...er--P1048.aspx

    It is found in this section of the store: http://www.thecustomsabershop.com/Bl...n-MHS-C15.aspx

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

  8. #18

    Default

    Ah gotcha! Thanks

  9. #19

    Default

    Quote Originally Posted by Tixstud View Post
    Hdjoe, Wich Chassis are you using? Custom made?
    Yea itís made by Justin Marshall. Heís on Facebook. Sells them via Shapeways. I donít see how the speaker will work but Iíll figure it out when I get there
    Attached Images Attached Images

  10. #20

    Default

    I've finally finished mine. Took me around 12 hours to convert. Pretty happy with the result.


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •