This is my first Neopixel run. Is am using a Nano Bisc v4. Neopixel strings with the 470 ohm resistor on the data line. I followed the same directions from KR sabers video. Using the TCSS wiring guide for Neopixel/LED string setup.
My issue is that after everything is soldered the anticipation rises and all of a sudden, only one string lights up. So half the blade is dark while the other lights up. I believe it is soldered correctly if one is lit up. I don’t know if the other string is bad. But I can’t figure out why the second string is not lighting. Any help will be much appreciated. Please.
Bookmarks