-
Jedi Initiate
Classic Jedi saber
Here's a classic Jedi saber.
IMG_1550.jpg
IMG_1553.jpg
IMG_1549.jpg
Here's some specs:
RB / RB / Amber Coppernova
PRIZM
3D Printed switch holder mechanism inside the clamp
Two very tiny momentary switches under the card
Also, two white sequin-type LEDs under the card
28mm bass speaker
Recharge port is in the pommel
There should be a black trim ring at both ends of the MPP clamp, but I forgot the damn thing. I'll have to disconnect the four main LED wires to put it on. Also, the main LEDs aren't as bright as they should be. I'll check the settings. I didn't have space for R.I.C.E. Fortunately, I can get to the card easy enough. The pommel recharge port is going to require a longer kill key. I hope that doesn't mean my charger won't fit. Need to check that.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks