Results 1 to 2 of 2

Thread: Classic Jedi saber

  1. #1
    Jedi Initiate hapki's Avatar
    Join Date
    May 2014
    Location
    United States
    Posts
    452
    Blog Entries
    19

    Default Classic Jedi saber

    Here's a classic Jedi saber.

    IMG_1550.jpg
    IMG_1553.jpg
    IMG_1549.jpg

    Here's some specs:

    RB / RB / Amber Coppernova
    PRIZM
    3D Printed switch holder mechanism inside the clamp
    Two very tiny momentary switches under the card
    Also, two white sequin-type LEDs under the card
    28mm bass speaker
    Recharge port is in the pommel

    There should be a black trim ring at both ends of the MPP clamp, but I forgot the damn thing. I'll have to disconnect the four main LED wires to put it on. Also, the main LEDs aren't as bright as they should be. I'll check the settings. I didn't have space for R.I.C.E. Fortunately, I can get to the card easy enough. The pommel recharge port is going to require a longer kill key. I hope that doesn't mean my charger won't fit. Need to check that.

  2. #2

    Default

    Awesome little saber! Nice build!

    Tom

    "Mistakes are our greatest teacher."

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •