-
AV switches keep wearing out
Hello,
Before start, I must admit that my search Fu may need work, but couldn't find this. The problem I am experiencing is the AV cog switches keep wearing out. Something on the inside I think, I have been through two with the same issue. It is like I have to start pressing harder and harder to get them to function, or press it just at the right angle. Both switches worked fine for awhile then started acting up. Set up is NBV4 with Pex, RGRB set up. I am not using the LED and do not have that wired. I duel with this saber, so I am wondering if these switches just don't hold up well, and if there is a different option I should be using, any ideas would be appreciated. Also this is installed in a (yes I know, but it is what I had to work with I am not a wealthy guy) Dominix hilt from US, so I need an option that will fit the switch hole.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks