Results 1 to 4 of 4

Thread: Filing down the yellow component on the CF8 - GOTH 3D chassis and Saberforge hilt

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1

    Default Filing down the yellow component on the CF8 - GOTH 3D chassis and Saberforge hilt

    Greetings again. I've come to the unfortunate conclusion that to fit this board into my saber using the chassis I got from GOTH 3D, I have to file down the yellow component on the CF8 board that is next to the battery/recharge port power pads.

    Has anyone else had to do this? I've started filing it as was mentioned on GOTH 3D's website (at my own risk) , but I am concerned how much of it I can remove.

    I could bore out the inside of the hilt more I suppose, but would need to find someone with a lathe for that (might be able to do this). Any thoughts?
    Last edited by Schwizzle; 10-30-2017 at 06:41 AM.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •