Originally Posted by
Tom Tilmon
You don't need a power extender for B/B/W. Blues go to L Pad, white goes to FOC Pad. No power extender needed. My Graflex with NBIV was wired this way, and I used a B/B/W LED on main blade. I also had a crystal chamber LED wired in parallel with main blade. All is well on my saber, and it works killer.
don't know anything about MWS wiring, I solder. Consider learning soldering, its easy.
prism is the cheapest of the Plecter Boards to offer blaster block, I believe that is correct.
Prism doesn't drain battery any quicker than any other board, its the Main LED that eats power, that and the speaker. Accent LED's and the board eat almost no power comparatively.
Tom
Bookmarks