-
soldering
Im having trouble soldering the wires to the led so im looking for advice on this what im doing is placing the wire on the silver pads on the led putting the solder wire to the wire and then applying the iron the solder heats up melts into a ball then does nothing
I know this is in here some where however when I do a seach Im not finding it I have already read several threads so I feel Ive done my assigned reading and as Outside influences seem to keep intruding (work marriage you know life) I dont have the time to read each and every single post in here
and since Ive already spent the money on this stuff Im gonna call this a customer service issue.
Yes Im very aggrevaited right now
so I would appreciate some help
-
-
soldering
so are you saying that the pads are solder or do i need to use the solder wire also what could cause the iron to not be hot enough
-
What ya want to do is kinda sanwhich it, take the wire and sanwhich it inbetween the pad and the solderwire and fuze them togeather. but remember, don tkeep the iron on the wire to long or it will heat up and could cause problems down the road.
good luck
-
-
-
-
-
-
soldering
the iron im using is a hot iron and the tip is pretty bad all black and crusted ive tried filling it off and sometimes it seems to help but its getting progressively worse do you have any tips
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks