Hello guys, I need some help with an annoying issue.
I've just completed my very first build using a Pico Crumble (Light Version), wired with an R-G-RB tri-cree XP-E2 and a 18650 removable battery. Blue and green dies are resistored with a 1 Ohm resistor and the red die got a 1.2 Ohm resistor.
When I pop the battery in everything works good: I press the switch and the soundboard revives, then I got sound, I got every color and FoC as It's supposed to be. The problem comes when I turn the saber off and leave it on the shelf fore more than 10 minutes, then when I grab it back and hit the momentary switch to turn it on again...nothing happens. If I pop the battery out, re-insert it and then hit the momentary switch twice the saber turns on again.
I double checked every solder joint and wiring, and I'm sure there are no bridging or exposed/pinched wires anywhere.

Could you help me to understand what's the problem?
Thanks.