Results 1 to 3 of 3

Thread: Crystal focus help with LED lighting

  1. #1

    Default Crystal focus help with LED lighting

    Hello,

    I have a crystal focus v8 board I just wired. First off sound works, switches work, and FoC works.

    The problem is when I turn on the saber, saber on sound works, but no lighting appears. I wired my LED to the High-Power LED Pads. It is powered with 2 18650 panasonic li-on cells.

    I am using the MPP 2.0 hilt if that helps with one switch no aux. I know the LED works because when I FoC it lights up for a split second then turns back off. How do I get a continuous blade lighting?

    I have not made any adjustments to the sd card. Everything is default.


    Thank you in advance.

  2. #2

    Default

    You likelyneed to edit the led parameters in the override.txt file. Your main led is probably just turned off in the color bank selection the board is currently set to.

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

  3. #3

    Default

    Thank you Jay-gon Jinn. I will edit the sd card settings when I go home. Much appreciated.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •