-
Jedi Initiate
Perfect Fit for Removable NeoPixel Blade
I read on this forum that 10-pin aviation plug connectors are a good way to go with neopixel blades. I serendipitously discovered a way to connect the receptacle for those blades solidly into a blade holder. (Apologies if this isn't new news. I'm pretty excited about it though...)
IMG_1265.jpg
10 Contacts 10-Pin Aviation Plug Connector - M16 - Panel Mount Round Flange
-
-
Jedi Initiate
Step Two - Flange in Heatsink
The next step is to place the flanged 10-pin aviation plug into the heatsink housing like this:
IMG_1259.jpg
IMG_1259.jpg
Here's another view, this one from the top:
IMG_1258.jpg
-
Jedi Initiate
Step 3 - Place in Choke
The next step is simply to place the two pieces in the choke:
IMG_1260.jpg
-
Jedi Initiate
Step 4 - Put Plug in Blade
The next step would be to put this part of the aviation plug into the blade:
IMG_1261.jpg
Wires from the neopixel string would go to this. A capacitor might fit in there too.
Here's what it looks like when plugged in, but without the blade:
IMG_1263.jpg
This view is looking into the emitter:
IMG_1264.jpg
-
Jedi Initiate
Another View
Here's a view of the final product, without the blade:
IMG_1265.jpg
This particular emitter may not be a good choice for the actual execution, but the cutaway shows how the parts fit inside the emitter.
What I like about this configuration is that it is solid. The parts fit together without drilling, glueing, etc. The blade retention screw should hold the other part of the blade secure.
-
Jedi Initiate
I have to point out that I got the information on the 10-pin aviation plug from jbkuma.
-
Jedi Initiate
The housing for the heatsink may not be necessary, now that I think of it. For one, it will prevent the plug pieces from fitting together well; that is, unless only the very tip of the aviation plug is placed in the blade.
-
Jedi Initiate
Without Heatsink Housing
Here's the flange in the emitter. It's a perfect fit. The heatsink housing isn't completely necessary, but without it, the flange rattles around.
IMG_1266.jpg
-
Jedi Initiate
Oh, and as jbkuma pointed out, this should allow blade charging and R.I.C.E. configuration via the blade plug.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks