-
Speaker installation question.
Can I glue a speaker to my aluminum tubing? I'm struggling trying to find a solution I could glue a speaker holder to the aluminum. I would like to use threaded rods to hold it, but I just don't have a way to do it with all my electronics inside. Plus the rods won't fit through mi ID. Any suggestions?
Last edited by Jediseth; 06-27-2017 at 06:30 PM.
-
In short, yes. With the base speaker be careful, the back is open to the diaphragm. Alternatively a 3D printed part could hold onto the magnet from.
-
Thank you, so would it be safer to use the premium speaker. What type of 3-D part do you mean?
" Hold onto the magnet from" I'm not sure what you mean.
-
It would be easier to not mess it up, since it's sealed.
You'd need something that can grab it from behind, since the magnet hangs off the back, a 3D part could be designed to hold onto the magnet instead of the rim of the speaker.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks