I have a question all.
I want to use some el wire in my crystal chamber but the el wire only runs on ac power.
I bought one of the $4.00 controllers that power the el wire, has a button you can make it static on, strobe and strobe fast. I bypassed the switch so it came on when D.C. Power was applied to one side, but the actual board is too large to fit inside my hilt. I tried shaving it down with a dremel and must have hit something important as the wire no longer lights up.
That got me thinking, can I just remove the thing on the board that converts to ac power and just wire that up? I don't need the board.
I have some pics of the board let me try to post.
Bookmarks