Results 1 to 5 of 5

Thread: Nano biscotte v4

  1. #1

    Default Nano biscotte v4

    Hi guys. New to the forums and new to saber smithing so I'm probably asking a dumb question but does the nano biscotte V4 need the power xtender because it says it's built in on the website. If it does need the power xtender can someone help me with a wiring diagram using the V4 and the light up av switch and recharge port

  2. #2

    Default

    I think you only need it if you want to take advantage of the color switching ability of the NBv4 and an RGB LED setup. If you're just doing a one-color blade you don't need to worry about using a PeX.

  3. #3

    Default

    I was going to use a GGW tri cree with white FoC

  4. #4

    Default

    Then no you won't need it both greens can run of one led oad and the FoC the second pad

  5. #5

    Default

    So just wire in the recharge port and light up av switch like normal?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •