Results 1 to 4 of 4

Thread: 1st Build Parts list check.

  1. #1

    Default 1st Build Parts list check.

    Hey all, so this will be my first DIY build and am a bit intimidated.

    This is what I am going toward, a custom etched take on a dark side Satele Shan saber. (will end up doing two down the road)

    or


    Today I ordered the following(jumped on it since the NBv4 came in stock).

    Nano Biscotte Sound Module V4

    MHSV1 Blade Holder Style 22

    Pommel style 3

    Hilt Style 1 (7" Double female threaded connector)
    Machine recessed 16mm AV switch hole DF7

    16mm Anti Vandal Momentary Stainless Switch

    This is just to get me the NBv4 and the saber body to start fabrication, powdercoating and etching.

    In my wishlist for my next order I have the following:

    Switchcraft 2.1mm Power Jack

    Custom Tri-Cree LED
    Red Cree Die
    Red Cree Die
    Deep Red Cree Die

    MHS speaker mount V5 - For 28mm Speakers

    Acrylic Chassis Disc for NB and 18500/18650 pack - S3 (Black)

    Stainless 4-40 all thread

    Stainless Steel 4-40 Hex nut - 6

    Kill plug style 5 - Silver

    Li-Ion 18650 3.7V 2600mAh PCB Protected Rechargeable Battery Module

    18deg Tri-Rebel/Cree Star Lens

    Star thermal tape pad - Tri LED

    Chassis Disc style 2 with holes

    2W 28mm Bass Speaker



    Some things I am not sure if I need or where to find are a LED Lens Holder(couldnt find) and resisters for the LED if any are needed.

    Is there anything I have planned wrong for or forgotten?? Thanks!
    Attached Images Attached Images
    Last edited by RMDphoto; 05-20-2017 at 05:24 PM.

  2. #2

    Default

    Well, I found a resistance calculator and I added two 1.5Ohm 5w resistors to the wishlist along with a power extender to do flash on clash.

    Would really appreciate someone looking everything over and verifying if I have everything right....Please!

  3. #3

    Default

    Depending on how you're wiring your LEDs you don't need the PEX. If you're wanting both Reds to be the main color and Deep Red to be your FoC you can use your L1 for both mains, and L2 for FoC just like the NBv3 did.

    You may want some of the spacers for your Chassis to cover the 4-40 threaded rod between your discs

  4. #4

    Default

    Thank you much, thats exactly what I am wanting to do with the LED's

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •