So had to postpone wiring for until today. Little rear end fender bender last night kinda of killer my free time. (only car damage luckily, noone hurt)

So that left this AM as build day finally


LEDs always end up being a pain for me to solder. Getting better at it thou, happy how this one went. Way faster that the last LED I did.


First time using a PeX AND first time soldering to a circuit board. Fun little learning experience.


NBv4, heck of a challenge soldering this up. Mostly because when I started I was simply terrified of frying my board. Had a few little mix ups, corrected and all works perfectly Quite happy.


Speaker and in pommel recharge ready to go!


Now I've got the hilt together and tinkering with fonts and such. Two last things to work on though:

Clamp card still needs more sanding. Sometimes it works great, sometimes it works but no click sound at all, ... and sometimes it's constantly pushed. So should at least be close to being right size.

Also, Blade Holder 20, with glass eye, red button, and 4 long electrical pins,.......totally blocks a blade. So i'll have to cut threads on the glass eye most likely, to make it flush and let the Red Button be the retention screw. The pins,.....I'm hoping if I purchase the short ones the threads are shorter and it flushes out in the holder.

More pics once I get it finished!