Results 1 to 6 of 6

Thread: First Saber "Weiss" Parts List

  1. #1

    Default First Saber "Weiss" Parts List

    Just wanted to make sure nothing was missing.

    Hilt:
    MHS Hilt Style 1
    MHSV1 Blade Holder Style 25
    MHS Pommel Style 4
    MHS Choke Style 1
    MHS Sleeve Material, 18"
    MPS Clip
    MPS Disc Style 6
    Av Box Style 13

    Electronics:
    Prizm Sound Module V4
    Li-Ion 186503.7v 2600mAh PCB Portected Battery
    16mm Short Momentary AV White Switch
    Premium 28mm Speaker
    Custom Tri-Cree LED-White/White/Royal Blue
    3 1-Ohm 2-Watt Resistors
    1 DynaOhm Resistor
    Star Thermal Tape Pad-Tri LED
    18 Degree Tri-Rebel/Star Lens
    MHS Heat Sink V3
    Switchcraft 2.1mm Power Jack
    3.7V Li-ion smart charger with 2.1mm plug
    Kill Plug Style 5-Black
    3.5mm R.I.C.E. Port Style 1
    USB to 3.5mm R.I.C.E. Cable
    Black Momentary Switch


    Chassis/Miscellaneous:
    1" Thick walled Trans White PolyC 40" long-Cut to 28"
    1" Thick walled Polycarbonate 40" long-Cut to 28"
    2 Bullet Shaped Tips for Thick Walled Blades
    1" Hilt Safety Plug-Style 5
    8-32 x 3/8" Stainless Steel thumb screw
    8-32 x 1/4" socket head
    Covertec Knob
    2 Stainless 4-40 All Threads
    2 Stainless Steel 4-40 Hex Nuts
    MHS Speaker Mount V4
    Acrylic Chassis Disc for PC and 18650
    Assorted aluminum spacers
    2 Chassis Discs, Style 5

    And the appropriate drill/tap, powder coat, av box drilling services. Maybe some shrouds because I don't trust myself.
    Last edited by Duality; 04-29-2017 at 07:24 PM.

  2. #2

    Default

    Looks good to me

  3. #3

    Default

    Yup, that should be everything.
    Join me, join the dark side!

  4. #4

    Default

    I assume you already have appropriate small gauge wire and wire strippers, solder and soldering iron [ESD safe highly recommended] and heatshrink?

    If you intend at some point to cosplay or wear the saber you might want to add a Covertec belt clip to go with the knob.

    Otherwise thats one of the most comprehensive parts lists I've seen...you obviously have done your homework. Well done and please post pics of your saber when completed in the gallery - we love to see those there. Good Luck with your build and MTFBWY.

  5. #5

    Default

    Yup, everything but the wires. What gauge do you recommend I use for easiest installation?
    One of these days I'll build a Rubik's cube saber... just wait.

  6. #6

    Default

    I typically use 26 or 28 gauge wiring for everything in my sabers. You can find it here: http://www.thecustomsabershop.com/Wi...hrink-C20.aspx
    We all have to start somewhere. The journey is all the more impressive by our humble beginnings.

    http://led.linear1.org/1led.wiz for the lazy man's resistor calculator!
    http://forums.thecustomsabershop.com...e-to-Ohm-s-Law for getting resistor values the right way!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •