Quick double check

[Warlock]

I'll try that this weekend. Thanks!

[Warlock]

Noticed today will playing with my son that my Red Orange led is not lit. That's probably been the whole issue so tonight I'll tear into that a bit

[Warlock]

Argh. So figured one problem out and found another.

Red Orange led my negative was a bad solder. On solid but no contact. Which is kinna odd since I saw I tested the leads via AA batteries after soldering.
In fixing this I realized why I shouldn't solder wiring late at night. Had resistors on my negatives and had my AV switch LED wired to these leads so they ended up backwards.

Needless to say now my AV led doesn't work. Got 3.4 volts on the switch after the dynaohm. Verified power in is main positive and power out goes to switch side.

Tried a quick AA test and had a momentary light up but that was all.

Not sure if it's the dynaohm fried or the led