Results 1 to 2 of 2

Thread: Can anyone confirm specs of the Cyan/Cyan/White

  1. #1

    Default Can anyone confirm specs of the Cyan/Cyan/White

    Sorry for the noob question, but I wanted to confirm the specs of the Tri-Cree cyan/cyan/white.
    http://www.thecustomsabershop.com/Lu...Star-P777.aspx

    I assume these are the same as the single brethren, yes?
    http://www.thecustomsabershop.com/Lu...Star-P523.aspx

    So, I would use these parameters for the resisters, yes?

    CYAN
    Battery Voltage: 4 (rounded from 3.7)
    Max Current: 1
    Forward Voltage at Max: 3.4

    WHITE
    Battery Voltage: 4 (rounded from 3.7)
    Max Current: 1
    Forward Voltage at Max: 3.1


    This would put the resisters and 0.5 Ohm and 1 Ohm respectively (from the shop).

    Just had to confirm I was reading that correctly and that the Tri-Cree is just three singles mounted to the same disc.

    Thanks in advance.

  2. #2

    Default

    Yes. However, you don't really round battery voltage specs. You use 3.7V.
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •