-
Question on a Tri Cree
I'm thinking of getting a Custom Tri Cree with Red Orange/Amber/White dies. White for FoC, and mixing the other two to try to get a deep orange. Anyone done this before? Am I over thinking this? Would it be better to use an RGB and mix the colors? If so would i just use FoC with a different resister to create a good noticeable flash?
-
Jedi Council Member
What sound card are you using?
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Yea that'd be helpful to know wouldn't it?
NBv3
-
-
Jedi Council Member
Originally Posted by
Warlock
Anyone at all?
If I get a chance, I'll see if a saber I have that has Red-Orange and Amber is set to mix those two colors together - with that said, I doubt those two colors will get you to Orange. You're also not going to be able to easily mix a RGB Tri-Cree with a NB.
TCSS MODERATOR
All n00bs READ these first (PLEASE)!!!:
1. Forum Guidelines
2. FJK’s “Down and Dirty” guide to Ohm’s Law
"Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
My email: fjk_tcss@yahoo.com
-
Thanks. I kinna figured RGB mixing wouldn't be best. I know I could via resistors but that would be pretty much trail and error without buying a few pots.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Reply With Quote
Bookmarks