Results 1 to 9 of 9

Thread: Smd led?

  1. #1

    Default Smd led?

    I am looking to add ambient light LEDs inside a reveal chassis, and I've seen mention of SMD LEDs directly on the sound card.

    Anyone here done this?

  2. #2

    Default

    I've mounted a 50/50 on top of the card holder. Does the job fine.

  3. #3

    Default

    Quote Originally Posted by Greenie View Post
    I've mounted a 50/50 on top of the card holder. Does the job fine.
    Pic or details?

  4. #4

    Default

    Check out the work of Madcow of Genesis Custom Sabers. He does this for almost all of his high-end sabers.

    Erv also has a video here. Just use LEDs instead
    of resistors. http://youtu.be/nJIJMfrbCQM

  5. #5

    Default

    Quote Originally Posted by NanoRex View Post
    Check out the work of Madcow of Genesis Custom Sabers. He does this for almost all of his high-end sabers.

    Erv also has a video here. Just use LEDs instead
    of resistors. http://youtu.be/nJIJMfrbCQM
    Thank you. Now, do you also have to resistor the SMD LED?

  6. #6

    Default

    Quote Originally Posted by Darth Nurse View Post
    Thank you. Now, do you also have to resistor the SMD LED?
    You may, depending ont he specs of the LED in question
    TCSS MODERATOR
    All n00bs READ these first (PLEASE)!!!:
    1. Forum Guidelines
    2. FJK’s “Down and Dirty” guide to Ohm’s Law

    "Yeah, yeah, I've heard it all before... you want blindingly bright, super loud, running 1138 blinkies off of the cheapest sound card you can find AND you want all of it to run on a battery the size of a dime, and run for a very, VERY long time. That one cracks me up every time..."
    My email: fjk_tcss@yahoo.com

  7. #7

    Default

    Quote Originally Posted by Forgetful Jedi Knight View Post
    You may, depending ont he specs of the LED in question
    I would likely use blue or green to avoid that.

  8. #8

    Default

    I've noticed that Rob never uses warm LEDs for this. To produce an orange bar graph he'll use white LEDs with an orange film on top. That way you don't need to try and get resistors in there.

  9. #9

    Default

    Does anyone have a close up of how they attached the small SMDs to directly to the sound card. I saw a video of it on a PRIZM where tiny blue ones were mounted directly to the board and would light in sequence. That's pretty well exactly what I am looking for.

    Plan would be to have holes in the chassis cover to let the light blink through, Also, I'd likely alternate blue and green or even white for a little variation.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •