Oh Hai folks,
This is my interpretation of a graflex.
There was much contemplation and deciding wether or not this lightsaber was worthy enough to post on this site among all the other electronic works of art. After much deliberation I concluded that, no , it's probably not worthy to post here.
However, I am doing it anyway!
This is a sink tube I modified by hand and made all parts for. This is not the first one I have made, but the other two are back at the drawing board to try and get a better chasis system.
It is running a toy hasbro obiwan clonewars econo card (which has great effects, almost better than MR). 18650 lion 3200 Mah. I changed out and upgraded the clash sensors. It has a 2w bass speaker now I salvaged from an old battery operated speaker. The activation strip is from a TV remote I sanded down. It is "capacitive" activation which works with a moist finger or ring contact.
The blade screw will be the back button under the bunny ears. I'm thinking of painting it the proper red color. I might leave it brass to match the rest of the hilt.
IMG_20170321_125156.jpgIMG_20170321_125327.jpg
Bookmarks