Results 1 to 6 of 6

Thread: Feasibility & Wiring Check

  1. #1

    Question Feasibility & Wiring Check

    Hey everyone,

    This is my first saber build so im unsure of a few things.

    Things I am unsure of:
    1) resistors on the main LED. do i need 1, 2 or none at all?
    2) I did not wire Foc because the led i have currently just has a single green die so i was assuming foc wouldn't work or at least wouldnt have good effect. let me know if im wrong. (may change led in the future)
    3)is it correct to wire av illuminated switch to deep sleep pad?


    Capture.jpg


    Thanks in advance
    Attached Images Attached Images

  2. #2

    Default

    Hello and welcome. Yes, you need a resistor for the main LED. FOC requires a separate die so no that won't function without a tri led. Yes, you can wire the AV LED to the deep sleep.

    Greenie

  3. #3

    Default

    You don't have your accent LEDs (LEDs 2 and 3) hooked up to any positive current.

    Other than that, your diagram looks good to me.

  4. #4

    Default

    I did a quick revision of my diagram that represents closer to the parts I have and in more detail. I ordered a different led to rewire the mws led i originally purchased so i added foc. Let me know if you see any issues.

    Part list:
    Nano biscotte v3
    3.7v liion battery
    TriCree G/G/W
    12mm av switch
    MWS recharge port


    wiringv2.jpg

  5. #5

    Default

    You may wanna put a little resistor on your FOC die also the accents will only light up when FOC is activated.

  6. #6

    Default

    Thanks for the help. Wired them to the foc by accident. Will wire to led- and add resistors to foc as well.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •