Temple Guard Pike

[hapki]

This is a continuation of the thread started here.

I'm using a PRIZM on each end. LEDs are R,G,A(mber). The red and green should give me a decent yellow color, and I'm going to use amber to enhance it and to give a slightly different shade for FOC.

I'm also using a stereo amplifier for each end. This won't really make the saber louder, but it should make a richer sound. I used this amplifier on my shock blaster with good results. I'm still deciding on speakers. I will definitely use one bass speaker on each end. I'm trying to decide on the second speaker. Ideally, I'd use a premium speaker from TCSS, but I'm not sure about placement and getting a mass of wires around through a channel in the speaker holder. I may use one of these Scalelike speakers. That would give me a little more room for wiring.

Obviously this isn't going to be an exact model of the Temple Guard pike. I'm taking some artistic license with it. The style 14 activation boxes are definitely not canon, but I like them. The switches are yellow. (I started with white, but I like yellow better because it matches the blade.)

Here is the under layer.
IMG_0813.jpg
I'm using the slotted double male sections as a vent for sound. The project is all about sound.

I have two style 3 extensions on each end. This makes for a heavy pike, but the brass tube fits perfectly onto them (and over the MHS sleeve material). Here's what that looks like:
IMG_0814.jpg
Finally, here is a picture of the outer brass sleeve layer.
IMG_0815.jpg
If you look at the temple guard saber, you'll notice that the outside sleeve covers about 180 degrees or so of the pike. I cut one brass tube to look like that, but when I did, it popped. It was under tension, and the brass tube expanded so that it no longer fit nicely on the extensions/MHS sleeve. There was a huge gap. I wasted a brass tube, and that stuff isn't cheap. Dang. So now I'll have to keep the tube reasonably intact to get it to fit. That'll mean another deviation from the canon Temple Guard pike. I ordered another brass tube. I'll start cutting into it next week.