Results 1 to 5 of 5

Thread: This Heatsink in Vader Conversion?

  1. #1

    Default This Heatsink in Vader Conversion?

    Hey everyone,

    I want to convert my Vader Force FX 2015 Lightsaber and I am planning on getting the Conversion Kit for it. Gonna put a Tri-Cree LED and was wondering if this specific heat sink module will fit in it? Thank you!

    http://www.thecustomsabershop.com/He...ole-P1011.aspx

  2. #2

    Default

    You do not need a separate heatsink, the blade socket in the conversion kit has a heatsink already:

    That's what that copper disc in the picture is....it threads into the rear of the blade socket and secures your led and lens assembly.

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

  3. #3

    Default

    oh okay thank but i want to put a tri cree in there, will the wires fit in that heatsink? And it says i need to buy lens holder, what is that?

  4. #4

    Default

    That heat sink will work for a Tri Cree if you drill your own center hole. You don't need a lens holder for a Tri Cree, just the LED , its tri lens and the LED adhesive star with center hole. The lens holder is for a single color LED.
    http://www.thecustomsabershop.com/18...Lens-P778.aspx
    http://www.thecustomsabershop.com/St...LED-P1143.aspx
    Don Mac.
    Sith Happens

  5. #5

    Default

    That sound board will likely not provide enough current to run a tri-cree....you'll have to wire the three led's in a parallel set, up which requires triple the current, in most cases, 3 amps. I doubt that soundboard will supply that kind of current.

    Got a question? Start Here. Have you tried the Thread Index yet? Most questions can be answered there.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •