Sab.jpg
So Im using 2 sleeves for my saber, the grip section is sink tube and the emitter section is a thicker MHS shroud. I'm not exactly sure how to secure the shroud to the saber properly, I plan on using the screws that secure the Starkiller like grips into the sinktube to secure the sinktube to the saber. For the emitter section, ill be using two screws at the bottom and a blade retention screw to secure the MHS shroud.
Edit: The image uploader wont work for me, so heres a link http://imgur.com/a/Au92k
Bookmarks