Hello guys,
I'm buying my first lightsaber from Ultrasabers and i have question about it.
Question is:can i put custom made crystal chamber into hilt of Ultrasaber Apprentice V4?
Is that possible?
Every comment is more then welcome.
Hello guys,
I'm buying my first lightsaber from Ultrasabers and i have question about it.
Question is:can i put custom made crystal chamber into hilt of Ultrasaber Apprentice V4?
Is that possible?
Every comment is more then welcome.
Welcome to the forums, unfortunately we can not help you.
These forums are part of a different company that is not associated with ultrasabers.
Ultrasabers have a poor reputation and are not talked about on this forum nor fx-sabers. You can look up reviews and judge for yourself.
The community on this forum will encourage you to design and build your own saber. There is plenty of material here to learn from so feel free to read all that you can.
Thanks,i wanted Ultrasaber because they are cheap,and i did heard bad reviews of them,but like i said,money is biggest problem.
I really would like to build up my own saber,but i have zero knowledge and only $140 including shipping.
I want just ''stunt'' saber with lights,and crystal chamber,but i don't think i can get that for $140.
Hi and thanks for answer.
I would really,really like to avoid Ultrasaber if there's any possibility to build my own saber for $140,but i don't know what parts i need and i don't even know where to start...
Is there a part list for baisic stunt saber here?
Just for info,i would like to get sound board later,and crystal chamber is more important to me then sound in this moment.
Most if not all Ultrasabers are 1 to 3 pieces(body, pommel, blade holder) But the one your looking at for $140 is just 2 pieces the body and the pommel. So it would be a bit hard to put a crystal chamber in it. Like Sevinzol said best to build your own. If you want to go on the cheap side for your first lightsaber use the sound board from one of the Bladebuilders that Hasbro has, there only $20 bucks. Soldering is not hard....just takes a little practice to get the hang of. And lack of knowledge is not a problem...all the members here can help you with the parts that you get stuck on. If you want a stunt saber without sound Tim's team can do the soldering for you on the main LED and attach JST Connectors to everyrthing for you. For $140 bucks with MHS parts and careful planing, you can build a really nice stunt saber(without sound) you will be proud of. Also building a crystal chamber is a little tricky for first timers...but it can be done with the proper planing.
Start here... http://forums.thecustomsabershop.com...mhsbuilder.php
Last edited by PhoenixHawk; 02-11-2017 at 10:27 AM.
That MHS Builder is great,i didn't even knew that such thing exist.
I was thinking about putting Hasbro sound board from cheap Hasbro toy in my saber.
Are those stunt saber good enough for mid dueling or are they a bit too weak?
How much would it cost for Tim's team to do soldering for me?
I chosed main body in MHS Builder,but I'm stuck on extensions.
I don't want to bother and taking time to other members or you,but I'm a real newbie when it comes to building lightsaber.
PS
Is there any way to build crystal chamber in MSH Builder?
Thanks one more time
I think even before you mess with the MHS builder you should check out the following videos.
https://www.youtube.com/watch?v=xdjX5Il3SnI
http://forums.thecustomsabershop.com...ber-with-sound
http://forums.thecustomsabershop.com...-Sound-STYLE-2
http://forums.thecustomsabershop.com...ilder-features
Then figure out your design.
As for a crystal chamber, you can not do one in the MHS Builder. But there are plenty of threads, build logs etc here on the forums that you can search for and view.
In regards to the shop soldering, that is something you need to discuss with Tim.
I watched first video,and i will watch other 3 tomorrow because of slow internet speed.
I saw that Rob posted list of parts he use for basic saber in video description.
If i buy all of those parts (internals)and change hilt parts,like i did in MHS builder,will i be able to have saber that have working mechanism in hilt,but have hilt parts i like?
Here is how i imagine my saber (red circle is where i would like to have crystal chamber).
I would like to have chamber very similar like saber in your signature.
aber.jpg
You are more than welcome to check out the build log. http://forums.thecustomsabershop.com...-004-Build-Log
But be aware that the 3D printing for the chamber alone was $100.
Bookmarks