Second Saber, first MHS build idea will there be any installing problems? NB v3?

[RogueSyProject]

Here is my first MHS saber idea, second saber I will own. Now I know it might look really short but, I have seen a youtuber I guess he is from the FX-Saber site and he had a saber just over nine inch with a dual battery pack! Any way attached is the item In question please do let me know and advise from there! P.S I would like for the saber to stay small for a perfect one-handed saber only which is why I tried staying within 9 to 10 inches.New Saber idea 10.95.jpg

[jbkuma]

If you use the v6 speaker holder with 18650 and NBv3 then you only really need a little under 4" internally for that, plus room for your switch (and charge port?). It's hard to tell if that would fit from the preview. It'd be helpful to know what pieces you've selected.

[RogueSyProject]

If you use the v6 speaker holder with 18650 and NBv3 then you only really need a little under 4" internally for that, plus room for your switch (and charge port?). It's hard to tell if that would fit from the preview. It'd be helpful to know what pieces you've selected.

You might have saved me because I really don't want a long saber but, I also don't want to do a cram fu mess up like my first install. I have to redo it and I spent money on a chassis and speaker mount from Goth-3d just to break them both and find out it's because of my wires.. I digress though the I did have the v6 in mind for the install so that is really good to hear and I do want a recharge port as well so with that being said the parts of the saber are as listed from back to front:

Pommel Style 5 = .75"
Fluted Double Female Threaded Connector = 3"
MHS Extension Blank Style 1 = 3.7'
MHS Gear = 1.5"
LED Blade Holder Style 25 = 2"

[Darth Nurse]

I think you will have plenty of room. Be aware though, that I do not believe that the extension blank has the normal 1.25" interior, so plan you chassis around that if you are using chassis discs.

[RogueSyProject]

I think you will have plenty of room. Be aware though, that I do not believe that the extension blank has the normal 1.25" interior, so plan you chassis around that if you are using chassis discs.

I want to use the v6 Speaker mount is that ohk?

[jbkuma]

The v6 mount probably won't fit. I just measured one I have on my desk and the longest part is slightly more than 1.15", which is the listed ID of the extension blank. There's no listed ID for the fluted piece, but you might not be able to use any of the speaker mounts from the store if it's under 1.25". The main portion of the mount is slightly less than 1.25", the lip is slightly more than 1.3".