Hello saber people.

First of all let me thank you for this awesome comunity I've been a member in the shadows for a long time reading and investigating to build my first saber and I finally did it.

I did it step by step as suggested checking and double checking and everything works exept one thing. As the title says as soon as I remove the kill key my FoC die comes on after I turn it on it works the way it should. Now I've done my best to build the saber and everything without bothering you guys, I've read the manual a lot and checked my conections several times but I am in a place that I'm so close to perfect and don't want to ruin it now XD. So if anyone has any idea of how to solve this it will be most welcome.

Also as a side note has anyone gotten a bad charger from the shop? From what I read the charger should have a red led on and turn green when the saber is charged. Mine is red for 1 sec when plugged to the wall and turns green while the saber is unplugged and stays green. When I plug in the saber the light is always green and it doesn't charge it at all. The battery works because I managed to charge it elsewhere and it's been doing fine and I asume the recharge port is good since the kill key works as intended.

Excuse any incompetence on posting, first forum post in my life.

Thanks a lot for the help.