Please pardon my inexperience, but I'm having trouble having the MHS sleeve material slide over the joint between the blade holder and the MHS extension or main bodies.
I've sanded the sleeve edges to make sure there are no burrs on the sleeve's edge openings, but am having no luck of it sliding over the joint. I've noticed that the blade holders on my couple of hilts are a hair offset from the main bodies or extensions when fully threaded in thereby causing my issue, especially since the tolerances of the sleeve to the body is really precise.
I've tried searching the forum for a few days for some tips and have come up empty handed. Is there a small tip I'm missing to have my sleeve slide over properly over the joints?
Bookmarks