Results 1 to 3 of 3

Thread: Perfect diffuser for sheet?

  1. #1

    Default Perfect diffuser for sheet?

    Hi, I have a question, I do not know if it is the correct section to ask.
    I have tried all the ways to have a sable with good light diffuser, and the only one that is perfect for me, is the original master replicas - hasbro, putting the inner film is perfect.
    The problem comes when you have to replicate more sheets, and I can not find the name, nor the material inside the original hasbro-MR sheets, nor any film that gets such a perfect spread.

    Do you have any idea what kind of plastic it is? Or an alternative that is almost the same?

    greetings and thanks!!!!

  2. #2

    Default

    Gift wrap cellophane (micheals comes in 40"×100') about 7-14' needed for tri star blades. Packing foam for string blades. There is a how to on fx-sabers.

  3. #3

    Default

    I tested pex tube with cellophane paper inside, and I get an effect almost as good as the empty hasbro sheets. Just the problem: it increases the weight a lot.
    There the result is quite similar, but almost triple the weight, it is a little more than the heavy grade and that is a 2mm tube and another PEX tube.
    Left, hasbo fx blade, right, polycarbonate + pex
    IMG_4261.jpgIMG_4260.jpgIMG_4259.jpg
    I leave these photos and this information in case I serve someone.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •