Originally Posted by
Bitchnerd
So as usual, I seem to have everything backwards lol I always do, if I don't get it all spot on, I get it all bloody wrong! Lol...
So [b]NO[//b] BuckPucks as I plan to use a soundboard and DO use resistors! And use the link you provided to work out the resistor calculations.
Again I have the switches backwards, so a latching switch, is that a switch I have to keep hold of to keep on? And a momentary switch, I press to turn on, then press again to turn off?
Not exactly. A latching switch is always press on, press off. A momentary switch is press and hold for on, release for off WHEN THERE IS NO BOARD TO CONTROL IT. When there is a board to control it a momentary switch becomes a press on, press off.
So decide on a soundboard before the battery as the soundboard will effect the battery I get?
Yes
Ok, if I'd understood and got things corrected now, I think I have it to work out what I need next for my list.
Also to go back to one of my original questions, the LED colour for the switch, I see there are many options in TCSS, including one that changes from red, to Gergen, then blue. But am I right that there isn't one that you can use to match the colour of the saber blade? So if one day I wanted red, then it could be red. Then the next purple, then free. And so on? It can't do that can it? So in your opinion, keeping with a nice clean white ring so it doesn't clash to much with the colour of the blade?
Bookmarks